EL2622, ES2622. Lamp test, electronic ballast 4 x 58 W. Relay output. Connection technology relay output. Load type ohmic, inductive, lamp load. Minimum permitted load 10 mA at 5 V DC. Suitable for ohmic, inductive and lamp load.
Preloader Close
Archive for July 10th, 2026
Archive for July 10th, 2026
Archive for July 10th, 2026
Beckhoff EL2622 EtherCAT Terminal, 2-channel relay output, 230 V AC, 30 V DC, 5
EL2622, ES2622. Lamp test, electronic ballast 4 x 58 W. Relay output. Connection technology relay output. Load type ohmic, inductive, lamp load. Minimum permitted load 10 mA at 5 V DC. Suitable for ohmic, inductive and lamp load.
Beckhoff EL2622 EtherCAT Terminal, 2-channel relay output, 230 V AC, 30 V DC, 5
EL2622, ES2622. Lamp test, electronic ballast 4 x 58 W. Relay output. Connection technology relay output. Load type ohmic, inductive, lamp load. Minimum permitted load 10 mA at 5 V DC. Suitable for ohmic, inductive and lamp load.
MicroLogix 8 Point Digital Output Module 1762-OA8 /A Sealed In Stock
The Allen-Bradley 1762-OA8 is a solid-state output module. The 1762-OA8 uses an input power of 100 to 240 Volts AC. Function Solid-State Output Module. Input Power 100 to 240 Volts AC. Heat Dissipation 2.9 Watts.
Siemens 6ES7132-6BF01-0AA0 SIMATIC ET 200SP, BaseUnit BU15-P16+A0+2B/T, BU type
Siemens 6ES7132-6BF01-0AA0
Beckhoff EK1122 2-port EtherCAT junction
The EK1122 2-port EtherCAT junction can be used in an EtherCAT Terminal segment at any desired position between the EtherCAT Terminals and enables configuration of EtherCAT star topologies. A modular EtherCAT star hub can be realized by using several EK1122 units in a station. Special features: Connection technology: 2 x RJ45 socketsConnection lengths: up to 100 mCan be used for configuring an EtherCAT star topology The EK1122 has two RJ45 sockets, which enable connection of an Ethernet cable with RJ45 connector and establish a connection to a further EtherCAT segment or to individual EtherCAT devices. The EK1122 supports coupling and uncoupling of EtherCAT segments during operation (Hot Connect). Technical dataEK1122Task within EtherCAT systemcoupling of EtherCAT junctionsData transfer mediumEthernet/EtherCAT cable (min. Cat.5), shieldedDistance between stations100 m (100BASE-TX)ProtocolEtherCATDelayapprox. 1 µsData transfer rates100 Mbit/sConfigurationnot requiredBus interface2 x RJ45Power supplyfrom E-busCurrent consumptiontyp. 220 mAWeightapprox. 65 gOperating/storage temperature-25…+60 °C/-40…+85 °CEMC immunity/emissionconforms to EN 61000-6-2/EN 61000-6-4Relative humidity95 %, no condensationVibration/shock resistanceconforms to EN 60068-2-6/EN 60068-2-27Protect. rating/installation pos.IP20/variableApprovals/markingsCE, UL, ATEX, IECEx, cFMusEx markingATEX: II 3 G Ex nA IIC T4 Gc IECEx: Ex nA IIC T4 Gc Ex tc IIIC T135 °C Dc cFMus: Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx ec IIC T4 Gc Housing dataEL-24Design formcompact terminal housing with signal LEDsMaterialpolycarbonateDimensions (W x H x D)24 mm x 100 mm x 52 mmInstallationon 35 mm DIN rail, conforming to EN 60715 with lockSide by side mounting by means ofdouble slot and key connectionMarking–Wiringspecific push-in connection